Tel: + 27 11 465 5566    Email Us

 

Plaster/Ceiling Finishes

LITE BOND
ACRYLIC INSULATING PLASTER  FINISH

APPLICATION GUIDELINE:

  • Mesh Sizes: 50000L x 1000 W x 4mm Apperture Size
  • Dry Plaster in 20 kg Paper Bag
  • Polymer Mix in 5 litre containers

 

Spread: 5kg per square metre approximate thickness (3mm)

 

Ratio: Dry mix: Liquid (w/w) 4:1

Mokete Africa Holdings CC - LiteBond - Step 1: Add Acrylic Component to bucket
1. Add Acrylic Component to bucket
Mokete Africa Holdings CC - LiteBond - Step 2: Add dry component
2. Add dry Component
Mokete Africa Holdings CC - LiteBond - Step 3: Mix well until all dry powder is mixed in
3. Mix well until all dry powder is mixed in
Mokete Africa Holdings CC - LiteBond - Step 4: Rinse tools in clean water
4. Rinse tools in clean water
Mokete Africa Holdings CC - LiteBond - Step 5: Plaster mix before application
5. Plaster mix before application
Mokete Africa Holdings CC - LiteBond - Step 6: Apply Plaster evenly to soffit
6. Apply Plaster evenly to soffit
Mokete Africa Holdings CC - LiteBond - Step 7: Apply Mesh
7. Apply Mesh
Mokete Africa Holdings CC - LiteBond - Step 8: Press mesh into the plaster
8. Press mesh into the plaster
Mokete Africa Holdings CC - LiteBond - Step 9: Trowel mesh into the plaster
9. Trowel mesh into the plaster
Mokete Africa Holdings CC - LiteBond - Step 10: Fill up and add plaster to do the second coat to finish
10. Fill up and add plaster to do the second coat to finish
PRODUCT ADVANTAGES

The Acrylic Plaster and Mesh system is easy to prepare and can be applied to all EPS insulation and masonry substrates. Use Notch Trowel to apply a first coat of plaster.
Drape the Fiberglass  mesh on the ceiling or wall and  flatten out the plaster using a smooth steel trowel.

  • Take 50% of the polymer liquid and add it to a mixing dish. Slowly add 50% of the dry plaster power and let it soak before mixing it in. Any quantities can be mixed, but at the 4:1 ratio only (w/w)
  • Mix in thoroughly to a smooth consistency breaking up all the lumps.
  • Apply sparingly to the wall or ceiling using a notch or smooth trowel and then drape mesh using a steel plaster trowel ensuring no creases form in the mesh and work towards an even spread of pre-plaster without coating the fibre strands completely.
  • Let dry for approximately 10 minutes or until you can touch the first coat. Then do a second final rendering, coating all the fibers strands to form a smooth 5-7 mm coating thickness.
  • Only available in natural cement color.
  • When a very smooth finish is required, a commercial skimming compound can be applied as third coat.
  • In cases where the soffit is very uneven, we recommend the following: Start with the first application without mesh and do not trowel flat, leaving it to dry with a notched finish. When dry, use regular plaster technique to flatten out. When dry, apply Acrylic plaster and mesh as detailed in steps 1 to 4.
LITE SPAN CEILING
STRONG, WASHABLE AND EASY TO INSTALL
  • Is a composite ceiling element comprising of a white Chromadek upstand ceiling pan element laminated   one side of FRCel TM Fire Retarded Expanded Polystyrene with a B1 fire rating : SANS 10177-11
  • Offers a durable, high pressure washable and aesthetically pleasing white insulated ceiling solution
  • Ceiling boards are available in widths of 282 and 490mm in any lengths up to 6000mm is Installed using ceiling rails and adjustable hangers from trusses. No battens required
ROCKWOOL CEMENT CEILING BOARDS

Consisting  of HD Fibre Fire Resistant cement Boards laminated to Rockwool which are  fixed with anchors to the soffit of the INSUDEK SLAB

  • Mokete Africa Holdings CC - Litespan
  • Mokete Africa Holdings CC - Litespan
  • Mokete Africa Holdings CC - Litespan
  • Mokete Africa Holdings CC - Litespan
  • Mokete Africa Holdings CC - Litespan
Mokete Holdings Africa CC - Rockwool Cement Ceiling Boards

THE ABOVE PRODUCTS ARE DISTRIBUTED BY MOKETE AFRICA HOLDINGS CC &  LITEDEK (BOTWANA) (PTY.) LTD